Refrigerator Door Push Button Switch

The Kenmore LG 6600JB1010A refrigerator door push button switch is a common component used in refrigerators to control the dispenser functions, such as water and ice. Below are specifics, troubleshooting tips, and installation instructions for this part.

Specifications

• Part Number: 6600JB1010A
• Compatibility: Designed for Kenmore refrigerators with a push-button dispenser (often used in LG-manufactured Kenmore models).
• Function: Activates the water and ice dispenser when pressed.
• Appearance: Typically a small, rectangular switch with a button and wiring harness.
• Location: Located behind the dispenser panel on the refrigerator door.

Troubleshooting

If the dispenser is not working, the push button switch may be faulty. Here’s how to diagnose the issue:

1. Check Power Supply:
   • Ensure the refrigerator is plugged in and receiving power.
   • Verify the circuit breaker or fuse is not tripped.
2. Test the Dispenser:
   • Press the button to see if the dispenser activates.
   • If nothing happens, the switch may be faulty.
3. Inspect the Switch:
   • Remove the dispenser panel to access the switch.
   • Check for visible damage, such as cracks or loose wires.
4. Test with a Multimeter:
   • Disconnect the switch and use a multimeter to test for continuity.
   • If there’s no continuity when the button is pressed, the switch is defective.
5. Check Other Components:
   • If the switch is functional, the issue could be with the dispenser control board, wiring, or water inlet valve.

Installation Instructions

Replacing the push button switch is a straightforward process. Follow these steps:

Tools Needed:

• Phillips screwdriver
• Flathead screwdriver
• Multimeter (optional, for testing)

Steps:

1. Unplug the Refrigerator:
   • Disconnect the refrigerator from the power source to ensure safety.
2. Remove the Dispenser Panel:
   • Locate the screws or clips holding the dispenser panel in place.
   • Use a screwdriver to remove the screws or gently pry off the panel.
3. Disconnect the Old Switch:
   • Locate the push button switch behind the panel.
   • Disconnect the wiring harness connected to the switch.
4. Remove the Old Switch:
   • Unscrew or unclip the old switch from the panel.
5. Install the New Switch:
   • Position the new switch (6600JB1010A) in place.
   • Secure it with screws or clips.
6. Reconnect the Wiring:
   • Attach the wiring harness to the new switch.
7. Reattach the Dispenser Panel:
   • Place the panel back onto the refrigerator door.
   • Secure it with screws or clips.
8. Test the Dispenser:
   • Plug the refrigerator back in and test the dispenser to ensure the new switch is working.

Additional Tips

• Ordering the Part: Ensure you purchase the correct part number (6600JB1010A) from a reputable supplier or directly from Kenmore/LG.
• Handle with Care: Be gentle when removing the dispenser panel to avoid damaging it or other components.
• Consult the Manual: Refer to your refrigerator’s user manual for model-specific instructions.

If you’re unsure about performing the repair yourself, consider contacting a professional technician for assistance.